Cold Rooms (Chilled & Freezer) in Jeddah
Freezer rooms in Jeddah—engineering & validation, supply and installation, defrost management, optional monitoring, and tests to ensure stable temperatures and product safety by Hboob.
Jeddah — Freezer Rooms (Thermal Design, Insulated Panels & Certified Refrigeration Units)
Precise Practical Definition
Freezer rooms in Jeddah are engineered to maintain stable temperatures at specified sub-zero setpoints while providing uniform air distribution that minimizes hot spots. Success depends on insulation thicknesses, floor/vapor-barrier detailing, evaporator/condenser selection, and defrost management.
What Hboob Delivers in Jeddah
Engineering & Design:
- Accurate cooling-load calculations (product mass/heat, in–out rates, door openings, infiltration).
- PU/PIR thickness selection, corner/floor detailing, and vapor barriers to limit moisture ingress.
- Evaporator placement to avoid dead-air zones or direct drafts on products, with Electric/Hot-Gas defrost strategies.
Supply & Installation:
- Freezer-rated panels and doors with thermal breaks and perimeter heaters; efficient condensers/evaporators; certified gaskets and closures.
- Refrigeration piping with pressure/leak testing, vacuum & refrigerant charging, and mechanical insulation for exposed lines.
- PVC strip curtains or air curtains at entrances to reduce cold loss.
Commissioning & Validation:
- Setpoint and alarm configuration, door-opening endurance tests, sensor calibration, and defrost scheduling.
- Handover with as-built drawings, operating instructions, and a preventive maintenance plan.
Maintenance & Support in Jeddah:
- Scheduled visits, coil cleaning, door/threshold heater checks, alarm and power-failure tests, and local breakdown response.
Typical Sectors
- Frozen-food warehouses and central kitchens, chilled retail chains, processing/packing facilities, and food-supply companies.
Why Hboob for Air-Conditioning, Refrigeration & Ventilation?
- Floor detailing that prevents ground freezing beneath the room and condensation build-up.
- Optional monitoring with a simple interface for temperature readings and alarms.
- Balanced CAPEX/OPEX through proper equipment selection and optimized defrost cycles.
FAQ — Jeddah
Can the room be expanded later? Yes—subject to panel lock system and refrigeration lines, after reviewing the revised load.
Best defrost type? Depends on application: Hot Gas is efficient for heavy frost; Electric is common and easy to control.
Do you supply large sliding doors? Yes—matched to opening sizes and handling equipment.
